Sheer Shades

Franklin Sheer Shades From Franklin Window Treatments

Soft vanes that never make a room dark

Call (317) 999-5154Get Free Quote
Quick Answer

Quick answers on this service. What it suits, what it costs to run, how it gets measured and where it falls short. If something below rules it out for your room, that's useful information before you order.

  • Service: Sheer Shades for Franklin homeowners
  • Service area: Franklin, IN and surrounding areas
    • The measure gets scheduled quickly. The build does not, because your fabric or shutter panel is cut to your numbers after you order. Two to five weeks is normal. Service calls skip that step entirely.
  • Insured and bonded
  • Serving Franklin, IN since 2008
Sheer Shades Services

Expert Sheer Shades for Franklin Homes

Sheer shades hang soft fabric vanes between two sheer facings, and they suit the front rooms of the 2,199 houses Franklin built in the 1990s, where a standard nominal 3.25 inch jamb with a flat stop gives the headrail somewhere clean to sit. Orientation is what makes them worth the money here. J B Ramsey, recorded as an original plat plus 2nd, 3rd and 4th subdivisions with lot numbers running to 57, takes its frontage from South Highland Drive and South Nineveh Road, both running north south, so principal elevations face east or west and catch direct sun at one end of the day. A sheer softens that instead of shutting it out.

Here's what a sheer shade will not do. Closing the vanes gives you privacy in daylight and a diffused glow at night, and it does not give you a dark room, because the facings are sheer by design and light passes through the fabric rather than only around the edges. Anyone selling a sheer as a bedroom blackout is selling you a return visit. The vanes also collect dust and can't be scrubbed, so cleaning means a vacuum brush rather than a cloth. And with light coming through the cloth all day, a sheer fades. UV drives 40 to 60 percent of fading damage, so a lining slows that rather than stopping it.

When to Call

Signs You Need Sheer Shades

If you notice any of these in your Franklin home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Low winter sun reaches all the way to the back wall

Afternoon glare washes out a television

The bottom rail sits crooked against the trim

The exposed roll at the top looks unfinished

Hard light stripes the floor every afternoon

The front room feels exposed to the sidewalk

A window above the stairs is unreachable by hand

You close the blinds and the room goes gloomy

Blinds block the view you paid for

A dining room needs to look finished from the street

Our Process

How Franklin Window Treatments Handles Sheer Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Consultation booked in the room

2

Vane size held at the window

3

Headrail leveled, shade hung

4

Diagonal checked for square

5

Cassette style chosen

Real Project Photos

Sheer Shades in Franklin

Photographs from real sheer shades jobs completed by our crew in Franklin and surrounding areas.

Custom shades measured and installed in FranklinPlantation shutters fitted to a Franklin windowCellular shades in a Franklin living room
Scope of Work

What Sheer Shades Includes

Every Franklin job is documented item by item. Here is what the crew covers.

What the room needs settled first, since a sheer shade answers glare and daytime privacy and does not answer darkness

Closed-vane behavior shown to you on a working sample before you order, because that is the whole product

The honest limit stated at the measure: closed vanes are private, and they are not blackout in any build

Vane size chosen against the opening, 2 inch on short windows and 3 or 4 inch where the glass can carry it

Vane opacity picked per room, a light filtering vane for living space and a room darkening vane where dimmer matters

Mounting depth measured for the roll-up, since the whole assembly rolls into the headrail and needs the room to do it

Clearance checked between the vanes and the glass, plus anything else living inside the opening

Three widths and three heights per opening with a corner-to-corner check, because a sheer shows an out-of-level hem instantly

Light gap per side disclosed in writing, with Lutron publishing 3/4 inch per side as a real inside-mount figure

Outside mount with a genuine overlap offered wherever the edges of the glass matter more than the reveal does

Night reversal explained before the sale, since lamps inside change what the sheer facing does

Rooms that truly need dark identified early and layered with a second treatment rather than oversold on this one

Cordless lift specified in any room children use, with products conforming to ANSI/WCMA A100.1-2022 for cord access

Width and drop checked against the fabric weight, since a knit facing over a long drop behaves differently than a short one

West and south exposures flagged, because a knit sheer works harder on hot glass than it does on a north wall

Every opening in a room ordered together so the facings come off the same run

Everything written down before fabrication, since IC 24-5-11 requires a contract on residential work over $150

Vanes opened and closed at every window and the shade cycled fully before we leave, with the right order to do it in shown to you

Pricing

What Sheer Shades Cost in Franklin

Published national ranges put custom-fabricated shades at roughly $250 to $2,600 per window, with motorized units at roughly $300 to $1,500 per window installed. Those are national category figures rather than a quote for anything in Franklin. Sheer shades sit in the upper half of the custom band, and the construction explains it: there are two knit facings and a row of fabric vanes suspended between them, assembled into one shade that then has to roll cleanly into a headrail. That is more fabric and more assembly than a single-layer roller. Vane size, vane opacity and the width of the opening move the number from there, and a fabric-wrapped headrail is usually part of the specification rather than an extra. Franklin Window Treatments prices from measured openings around Johnson County.

By Product

How Sheer Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

2 inch vanes: The finest scale we hang, and the right one on short windows and in smaller rooms. More vanes cross the same drop, so the face reads softer and the closed position looks more like a solid fabric than a row of louvers.

3 inch vanes: The middle size and the one most rooms end up with. It gives a clear view through the open position without looking oversized on an ordinary bedroom or dining room window, and it carries a normal drop well.

4 inch vanes: A bolder scale for tall glass and large openings, where a fine vane would look busy across that much area. Open, the view is genuinely open. Closed, the horizontal lines are a real part of how the room looks.

Light filtering vanes: The standard vane. Closed, it gives you privacy and a bright, soft room rather than a dim one. It's what belongs in a front room where the point is to look open from the inside without being open from the sidewalk.

Room darkening vanes: A denser vane that takes a bedroom down to genuinely dim when closed. Understand the limit: the two sheer facings are still sheer, so light passes at the vane joints and around the edges. Darker, never dark.

Fabric-wrapped headrail: A headrail covered in the shade fabric so the roll is hidden and the top of the window reads finished. On this product it's effectively standard, since a bare tube with a sheer assembly wrapping around it looks unresolved.

Cordless lift: A spring lift with no operating cord anywhere on the product, which is what we specify in rooms children use. The vanes still tilt with their own control, and there's nothing hanging beside the window to reach for.

Motorized lift and tilt: A motor that raises the shade and sets the vane angle, which matters here because vane position is the whole feature. Scenes let you save an open-vane daytime setting and a closed evening one and return to both exactly.

Outside mount with overlap: Mounted above and past the opening so the fabric laps the trim on both sides. It's how you cut the side light an inside mount always leaves, and on this product it also keeps the vanes clear of anything sitting inside the opening.

Layered with a blackout roller: A dual bracket carrying a sheer shade and a blackout roller at the same window, so the room gets the daytime look and the nighttime dark from two products doing what each is good at. It needs mounting depth planned up front.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Franklin room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Sheer Shades FAQ

Questions we hear most often from Franklin homeowners considering sheer shades.

It can, and you should know what you're getting. With the vanes closed you'll have full daytime privacy and a room that stays softly lit, which some people want in a guest room and nobody wants at six in the morning in June. The facings are sheer, so light passes through the fabric rather than sneaking around it, and no channel or outside mount fixes that. In a west facing bedroom in a Kingsbridge Venture plan, we'd put a room darkening shade in the opening and let the sheer go in the front rooms where the diffusion is the point. Two different products in one house is normal here.
Less than a honeycomb, and that's worth saying plainly. Testing at DOE and Oak Ridge put cellular savings at up to 20 percent of heating energy, and up to 15 percent of the total heating and cooling load, measured against a bare window. That result comes from air trapped inside the cells. A sheer has no cell and no trapped air, so it handles glare and privacy rather than heat. With a January average low of 20.9 degrees here, a north facing room you actually sit in is a cellular room. Where you want both, sheers in the front rooms and cellular on the cold elevations is the usual split.
Sometimes, and proportion decides it. Openings there run 20 to 30 per house in proportions no modern stock size covers, and a wide vane on a narrow tall window reads coarse, so a smaller vane holds the scale better. The bigger issue is the opening itself. Martin Place spans roughly 1850 to 1935 and its houses sit on original foundations, so they should be assumed out of square, and a sheer is unforgiving of a racked opening because the vanes hang level while the sill doesn't. We take a three point measure with a diagonal check, and where the racking is bad we'll recommend an outside mount.
Gently, and never wet. The vanes are attached to the facings along their whole length, and a wet cloth or a scrub deforms that attachment permanently, so the correct tool is a vacuum with a soft brush run down the face with the vanes open. Low pressure compressed air lifts what settles inside. Franklin's muggy stretch runs from about May 25 to September 22, and moist air carries more dust, so a shade in a room with a door to the patio picks up more than one in a hallway. A mark that won't lift is a case for professional cleaning rather than a home remedy.
View and scale, mostly. A larger vane opens to a bigger clear gap, so you see more of the yard when it's open, and it looks heavy on a small window. A smaller vane reads finer and gives you more, thinner slices of view. On the two story great room glass documented in Franklin's 2000s plans, a large vane holds its own against the volume, while the same vane on a bedroom window in a 1,354 square foot Arbor Homes plan would look out of proportion. We bring samples and hold them in your actual opening, because a vane size that looks right in a showroom rarely reads the same on a wall you own.
In the wrong room, yes. The vanes are soft and unsupported, so a dog that noses behind the fabric to watch the street will crease one, and a crease in a sheer doesn't fall back out the way a slat straightens. So we keep them out of whichever room the dog holds his post in, which in Franklin is almost always the front window facing the road. Where they do go in, specify a cordless lift or a wand. Where a small child can reach the covering, ANSI/WCMA A100.1-2022 conformance is the specification floor rather than an upgrade.
It's a row of horizontal fabric vanes suspended between two knit sheer facings, all built into one shade that rolls up into a headrail. Tilt the vanes open and you're looking out through sheer fabric with soft daylight coming in. Tilt them closed and the vanes overlap into a face that gives you privacy. Raise the whole thing and it disappears into the headrail, leaving the glass clear. So it does three jobs, which is why it costs more than a shade that does one.
No, and that's the disclosure that matters most on this product. Closing the vanes gives you privacy and a much softer room, and it is not blackout in any version, including the room darkening vane. The two sheer facings sit in front of and behind the vanes and they still pass light, particularly at the joints where one vane meets the next. If a bedroom in Franklin has to be dark for shift work or for a baby, we'll layer this with a blackout roller or steer you to a different product entirely.
With the vanes closed, mostly, and with an honest caveat. During the day it's brighter outside than in, so a closed sheer reads as solid from the street. After dark with lamps on, the balance flips and a closed sheer can still show shapes and movement from outside, especially on a first floor window facing a sidewalk. It's far better than an open vane, which after dark is genuinely see-through. On a front room that faces a street, we talk about this before you order, not after.
By the size of the glass, mostly. A 2 inch vane suits short windows and small rooms, and the closed face reads almost like a solid fabric. A 3 inch vane is the middle and it suits most ordinary openings. A 4 inch vane belongs on tall glass, where fine vanes across a large area start to look busy, and where the open view really opens up. Hold the samples in the actual room, because scale is the thing that photographs badly and reads instantly in person.
How much the vane itself blocks when it's closed. A light filtering vane keeps the room bright and soft, which is what a living room or a dining room usually wants. A room darkening vane is denser and takes a bedroom down to a real dim. Neither changes the facings, so the shade's honest ceiling doesn't move. Think of the vane choice as the difference between soft daylight and a good afternoon nap, rather than between light and dark.
More than a plain roller wants, yes. The whole assembly rolls into the headrail, so the headrail is larger than a bare tube bracket, and the vanes need to hang clear of the glass and of anything living inside the opening. We measure the depth at the top of the opening at the measure and we tell you honestly whether an inside mount will sit fully inside or stand proud of the trim. Where the depth isn't there, an outside mount is the better answer and it usually looks better anyway.
Down both sides on any inside mount, because the shade has to be narrower than the opening to travel at all. Lutron publishes 3/4 inch per side as a real inside-mount figure on their roller product, and the physics is the same here. The factory also takes its own deduction on top of that, which Lutron publishes as 1/16 inch per side. If the edges matter, an outside mount with a genuine overlap onto the trim is the fix, and it costs no more to decide that now than to regret it later.
With air, gently, and not much else. The facings are a fine knit and they hold dust rather than shedding it, so a vacuum on low with a soft brush across the face is the whole routine. Don't scrub, don't soak, and don't attack a mark with a wet cloth, because you can distort a knit and it doesn't come back. Static builds on these in a dry heated Franklin house in February, which is worth knowing before you assume the shade is dirty.
It becomes a factory repair rather than a field fix, and you should hear that before you buy. The vanes are attached to both facings along their length, so there's no way to swap one out at the window the way you can replace a vertical vane or a shutter louver. A pet that climbs, a vacuum head that catches, or a window that gets opened with the shade down are the usual causes. It's one honest reason we don't put these in a mudroom or over a dog's favorite window.
They both tilt, and they feel nothing alike. A blind tilts hard slats, which gives very precise angle control and a crisp look, and every slat collects dust individually. A sheer shade tilts soft fabric vanes behind a sheer face, so the light coming in is diffused rather than striped, and it looks like a shade rather than like hardware. The blind wins on precision and on cost. The sheer wins on how the room feels at four in the afternoon.
Different problems. Cellular is the one with the documented energy work behind it, where DOE and ORNL measured up to 20 percent heating energy savings against a bare window, and it goes fully dark in a blackout fabric. A sheer shade doesn't claim either. What it does instead is let you keep a view and daylight while still being private, which a cellular shade cannot do at all, since a cellular is either up or down. Front rooms often get sheers, bedrooms often get cellular.
It works there, with realistic expectations. A knit facing on a west or south window in Johnson County takes real sun from May through September, and lighter colors and finer knits soften over the years faster there than on a north window. The vanes themselves are the more durable part. On the room side, NFRC attributes roughly 40 to 60 percent of fading to UV, so closing the vanes through the afternoon slows what happens to your floors and furniture. Slows it, not ends it.
A powder room, comfortably. Directly over a sink or near a shower, we'd think twice. The fabrics are polyester and the humidity itself is not the problem the way it is with wood. Splashes are, because water marks show on a sheer facing more than on a solid fabric and there's no scrubbing a knit clean afterward. Steam that carries cooking oil is worse. Over a kitchen sink we'll usually recommend something you can wipe.
Two to five weeks in the normal custom fabrication window, and this product tends toward the middle of it because the vanes and both facings are assembled before the shade is built. Motorized units add a step. That window goes in your paperwork with the scope, the dates and the total price, which the Indiana Home Improvement Contract Act requires on residential work over $150. If a factory date shifts, we tell you the week we learn it instead of letting the calendar do it.
Areas We Serve

Sheer Shades Across Franklin

We measure and install in every one of these Franklin neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Franklin

Franklin Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Franklin

PVC where Johnson County humidity would ruin hardwood

Learn more →

Wood Blinds in Franklin

Stain that answers 1850s casing, not a paint chip

Learn more →

Vertical Blinds in Franklin

One pull clears a rear patio door

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Franklin

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Franklin, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 999-5154
Service area

Serving Franklin and the surrounding area

Call NowGet Quote